Change or rekey · Oro-Medonte
Smart Lock Installation
You have just taken possession of the house and the previous owners handed over a keypad deadbolt with a code nobody wrote down and an app account you cannot get into. It needs to become yours, properly, or be replaced.
Smart Lock Installation
In plain words
A smart lock fitted by a locksmith keeps a way in that works when the battery or network fails, a mechanical key on many models or an external battery contact on key-free ones. Most keypad deadbolts keep a conventional keyway, rekeyed during the visit so a fresh key operates it and the old one retires. Some models instead add small outside terminals where a nine-volt battery can wake a dead lock long enough to enter a code. The technician tests whichever route the model provides, shows the low-battery warning, and explains what the lock does if the internet goes quiet.
How the visit goesYou have just taken possession of the house and the previous owners handed over a keypad deadbolt with a code nobody wrote down and an app account you cannot get into. It needs to become yours, properly, or be replaced.
Oro-Medonte
How the visit goes
Who controls the door
A smart lock hands out access, so the visit begins by confirming who is entitled to grant it. For an owner that is photo identification and a link to the address; for a tenant it also means the landlord has agreed to the change, since in a rental both parties need a working way in. Where a property manager or a family member is arranging the work on someone else's behalf, the locksmith asks for that person's go-ahead as well. When a used smart lock is being taken over, the check extends to the account behind it, which must be released by whoever set it up. Ten minutes of paperwork here keeps everyone's access legitimate.
Retrofit locks that keep your outside hardware
Some smart locks mount only on the inside of the door and turn the deadbolt you already own, leaving the exterior face and the keyway as they were. Fitting one begins by checking that the existing deadbolt is on the model's compatibility list and that its tailpiece shape matches an adapter in the box. The interior thumb-turn is removed, the adapter fitted, and the motor unit clamped to the mounting plate so it sits square and turns the bolt through its full travel without slipping. Because the outside is untouched, these suit rented units where the landlord prefers the door unchanged, and older doors whose exterior hardware is worth keeping. The existing key keeps working alongside the phone.
Batteries, warnings and the cold months
A smart lock runs on batteries, and you leave knowing how that side of it behaves. The locksmith shows where the low-battery warning appears on the lock and in the app, how to swap the set, and which type to buy so the motor gets steady power. Cold shortens battery life, so a fresh set before the first hard frost is a sensible habit, and the alert should go to a phone someone actually reads. If the model has an external emergency power contact, you will have seen it used and know where a nine-volt battery lives for the day it is needed.
Smart Lock Installation
In the van
- Thick-door extension kit
- Dry PTFE lubricant
- Wi-Fi bridge or home hub
- Hand screwdrivers, Phillips and Torx
- Door-position sensor magnet
What affects the quote
Same fees day, night or weekend
1Supplying the lock yourself
If you have already bought a lock, the quote covers fitting and setup only, with a note on whether the chosen model suits your door; if the locksmith supplies it, the hardware is listed alongside.
2Reinforced strike and security hardware
A box strike with long screws is part of a sound installation and is listed as a part. A wrap-around door reinforcer or a hinge upgrade is offered where the door would benefit, as a separate option.
3Storm door and weather adjustments
Where the entrance calls for a vented storm door panel, a keypad shield or a model rated for heat and cold exposure, those items are named separately so you can choose them or not.
Smart Lock Installation: questions
I rent. Can I have a smart lock installed?
Yes, with your landlord's agreement first. Tenancy rules in this province expect a tenant to have the landlord's consent before changing a lock, and expect the landlord to have a working way in, so the sensible route is a short conversation and a note of what will be fitted. A retrofit model that mounts inside and keeps the existing exterior lock and key is often the easiest thing for a landlord to say yes to, since the door is unchanged from outside.
Can I install a smart lock myself?
Many people do, and on a door that already closes perfectly with the standard holes the instructions are manageable. Where a locksmith earns their place is everything around the box: recognizing a bolt that drags before it wears out a motor, enlarging or filling holes cleanly, fitting a reinforced strike, rekeying the override so the old key retires, and setting up the account and codes in a way that is easy to manage later. If you have started and hit a snag, that is a normal call too.
What information should I have ready when I call?
The door's material and rough thickness, what lock is on it now and whether it is a separate deadbolt above a knob or lever, and whether there is a storm door. Say what you want the lock to do: codes only, phone control, alerts, auto-lock. Mention how the Wi-Fi is at the front door if you know, whether you rent or own, and how many people need their own way in. A photo of the inside and outside of the existing lock is a real help.
Change or Rekey Locks
- Deadbolt InstallationYou bought a keypad deadbolt online and pulled the old one off, only to find the hole in the door…
- Lock Replacement & UpgradeThe century home's original mortise lock takes a key the size of a spoon, sticks in humid weather…
- Vintage Mortise Lock ServiceThe old skeleton key still fits the keyhole, but it now needs a jiggle, a lean on the door and a…
Smart Lock Installation near you
Every lock service we provide in Oro-Medonte starts with the same first step, which is looking at the door properly before deciding anything. The individual pages below explain what that look involves for each job, how the work is carried out, and what to expect from the hardware afterwards.